Positive periodic solution for a two-species ratio-dependent predator-prey system with time delay and impulse

A two-species ratio-dependent predator-prey model with time delay and impulse is investigated. By using the continuation theorem of coincidence degree theory, the existence of a positive periodic solution for this system is established.     

氩等离子体物态方程的TF简化模型

对于高温高压下氩等离子体的电离度和物态方程,本文给出了一种基于Thomas-Feimi(TF)统计模型的简化计算新方法:首先将TF模型电离势的数值结果进行函数逼近,给出一个便于数值求解的计算电离度的近似计算方法,并由此计算了局部热动平衡下的氩等离子体在10～1000 eV高温范围内的物态方程.计算结果与国外报道的其他几种理论模型的计算结果均符合很好,与实验值也吻合较好.本文所提出的简单模型也适用于计算混合物物态方程,可以在电磁发射技术领域中的强电离等离子体中有更为广阔的应用前景.     

基于专家动态权重的群组AHP交互式决策方法

为了能在群组决策中得到更为客观和准确的决策结果,在把专家权重划分为静态权重和动态权重的基础上,研究了在交互式决策中专家动态权重的确定方法,给出了共识度的一个定义.在此基础上,研究了群组AHP交互式决策方法中的一致性和相容性检验,给出了基于专家动态权重的群组AHP交互式决策方法流程,最后用一个示例说明了该方法的应用步骤.     

一类具无穷时滞泛函微分方程的周期解

讨论具有无穷时滞中立型泛函微分方程$ \frac{\rm d}{{\rm d}t}\left(x(t)-\int_{-\infty}^{0}g(s,x(t+s)){\rm d}s\right) =A(t,x(t))x(t)+f(t,x_t)$的周期解问题,利用重合度理论中的延拓定理得到了周期解的存在性和唯一性条件;特别地,当$g(s,x)\equiv 0, A(t,x)=A(t)$时, 给出了存在唯一稳定周期解的条件.     

一种非刚性医学图像点匹配方法

提出了一种非刚性点匹配的算法并把其运用于医学图像配准．该算法采用信号滤波的方法来获得点集间的匹配信息，并运用松弛标记法将各点邻域关系对模糊的匹配信息进行迭代获得明确的匹配关系．在此基础上，利用高斯径向基函数来描述点模式间的弹性形变，在基本的迭代框架下实现问题的求解．实验结果显示在形变程度为5％、出格点比率50％和噪声标准差为5％的情况下该算法的匹配误差能控制在0．13以下，表明了该算法的鲁棒性和有效性，较好地解决了医学非刚性形变的点匹配问题．     

Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

On Ramsey numbers of uniform hypergraphs with given maximum degree

For every ?>0 and every positive integers Δ and r, there exists C=C(?,Δ,r) such that the Ramsey number, R(H,H) of any r-uniform hypergraph H with maximum degree at most Δ is at most C|V(H)|^1+?.     

符号几何规划的一种分解方法

针对符号几何规划提出了一种直接的分解方法,将难于求解的符号几何规划问题等价地转化为一个非线性程度很低的可分离规划,为寻求困难度高且规模较大的符号几何规划问题的求解提供了一种方法,特别是经此方法分解后的每个子问题均易于求解,最后给出了数值实例,验证了此方法的有效性．     

自由基引发马来酸二丁酯熔融接枝低密度聚乙烯的研究

用马来酸二丁酯(DBM)为接枝单体,过氧化二枯基(DCPO)为引发剂,对低密度聚乙烯(LDPE)进行了熔融接枝功能化。样品的红外光谱表明接枝反应确已发生。通过对样品中酯基的皂化水解测定产物的接枝率,对产物进行萃取,用凝胶量间接表征产物的交联程度;用溶液的特性粘度从侧面显示样品的支化或降解情况。实验结果表明,产物的接枝率和凝胶量可以通过选择反应条件(温度、时间及反应混合物的组成)来控制;过量的DCPO是引起交联产生凝胶的主要原因;向体系中添加DMF可阻止交联反应的发生,但产物的接枝率也有所下降,以自由基机理对上述结果进行了讨论。